Step by Step: How to Drill at an Angle

Before tackling any construction or remodeling project, you need to learn basic skills and techniques, just like any other aspect of your life. As any professional contractor knows, the key to achieving a durable, professional-grade finish is to ensure that the groundwork is done correctly. How to drill a hole at an angle properly is one of the most important basic skills to learn. The following guides will take you step-by-step through three simple, yet effective methods.

Importance of Proper Technique for Drilling at an Angle

When performing simple tasks, such as drilling at an angle, careless mistakes are prone to occur. Tools used for this task require little energy input and present a low risk of injury, so the user may be less attentive than when performing more dangerous tasks. By following proper guidelines, you can avoid the chances of personal injury. Fundamental techniques guarantee a remodel or construction will withstand environmental conditions and stand the test of time. Something as simple as a screw being improperly drilled can be the reason why a structure fails an inspection or crumbles under the effects of weathering. For many contractors, word-of-mouth and known reputation can play a large role in the amount of business generated. When you make mistakes within basic techniques, it can negatively impact your work both now and in the future. Finally, before beginning any drilling, it is essential to gather the necessary tools and equipment for proper installation. With so many drill bits on the market, it can be difficult to determine which is best for your construction project. To learn more about how to pick the best drill bit for your task, visit our blog.

Method #1: Creating a Custom Jig

When drilling at an angle, the most effective and popular method is to use a custom-fit jig made out of scrap wood. To create this jig, begin by setting your miter saw to the desired angle. Next, you want to locate a piece of scrap or plywood to use as your jig. After your custom-fit jig is created, the next step is to drill perpendicular to the angled wood to create a guide for your final notch. To complete this process, place your jig firmly against the material you would like to drill into and secure all pieces using clamps and other reinforcements. You will know this has been done correctly when the jig lies flush against the material. If this is not the case, an abrasive paper or sanding tool can help smooth down the surfaces to match each other. Finally, use your pilot hole to identify where to drill your final hole, so that you can screw your final touches into place at the right angle.

Method #2: Utilizing a Speed Square

In the event that you do not have access to any material that can be used as a jig, a speed square is the next-best alternative. By definition, speed squares are triangles, usually made out of metal, with different angle markings running down the diagonal. This common tool is relatively inexpensive and can be found in most hardware stores or supercenters. To begin, line up the flat side of your speed square next to where you would like to drill your hole. Next, bring your drill along the side closest to you and direct it towards your material, creating the effect that you are drilling into the speed square itself. Lastly, align the speed square markings to the angle at which you would like to drill, and then begin drilling.

Method #3: Manually Drilling at an Angle

The final method used to drill at an angle is to manually align your drill to the desired angle using no additional tools or equipment. To accomplish this, you will need two sized drill bits – one that is the exact size of the hole you would like to make, and one that is just slightly smaller. Start by attaching the smaller bit to the drill and lining it up manually with the location you want to screw into. The resulting hole made will be your reference hole, or pilot hole. Next, insert the larger bit into your drill and guide it into the same hole so that your desired size and angle is created. If you are having trouble keeping your drill steady, or you are attempting to drill at an angle unachievable through this method, it is always a good idea to reach out to a professional for further assistance.

Contact Tri-Rent-All for Buying, Renting, & Repairing Electric Drills and Bits in Portsmouth & Hampton, NH

The goal of every project, be it a kitchen remodel, a floor replacement, or drywall installation, is to complete the project as appealing, cost-effective, and quickly as possible. The groundwork of any construction project, big or small, must be done correctly in order to achieve the desired result. By applying proper techniques towards basic skills, you can ensure that your remodel is highly stable and will last for many years to come. The three methods mentioned above are simple, but effective, towards properly drilling a hole at any angle. If you have any questions about any of these guidelines, or are not familiar with power tools, our experts are here to help. Fill out our contact form today, or visit our website, to receive more information about our wide range of inventory and expert tool repair services.

Leave a Comment

Your email address will not be published.